Cross and longitudinal compound rest (X1 and Z1 travel capability) |
Bed with 4 guid-ways, and the 3rd rail in the front side to enhance apron rigidity |
Heavy duty steady rest |
|
|
|
|
|
|
Tailstock rotary quill, A2-11 nose, MT#7 taper (3-jaw or 4-jaw chuck is opt.) |
Motorized Tailstock at the rear 2 guide-ways
|
Steady rest (opt. only for full length cross slide |
|
|
|
|
|
|
- 1. Full length carriage
- 2. Half length carrigage
- 3. Guide way for steady rest/tailstock
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features:
- Full length cross-slide: carriage across 4 guide-ways
- Half length cross-slide: carriage on the front 2 guide-ways
- Electric control panel for operationg easily
- 3 axes (X, Z and Z1) auto feeding and rapid traverse
- Stready rests and tailstock on the rear 2 guide-ways
- TIMKEN bearing
- Rigid construction, 100% made in Taiwan
|
Standard Accessories:
- Hydraulic spindle disk brake
- Auto lubrication system
- Coolant system
- 4-way tool post
- Leveling bolts & pads
- 6-way rapid traverse
- Metric / inch community gear box
- Tailstock dead center
- Tailstock rotary quill Ø290mm (11-2/5")
- Motorized tailstock
- Tool box with tools
- Operation & service manual
- Rigid construction, 100% made in Taiwan
|
Optional Accessories:
- Main motor with inverter (100hp)
- 3-jaw chuck
- 4-jaw chuck
- 4-jaw face plate
- Steady rest
- Heavy duty steady rest
- Boring device
- DRO
- Chuck guard and rear splash guard
- Electrical system for CE & CSA
- Work lamp
|
Specifications:
| Model mm (in) |
EV-70 |
EV-80 |
EV-100 |
| Center height |
900 (35") |
530 (21") |
585 (23") |
| Swing over bed |
1800 (70") |
1060 (42") |
1170 (46") |
| Swing over cross slide: Full length (Std.) |
1350 (53") |
750 (29") |
860 (33") |
| Swing over cross slide: Half length (Opt.) |
1530 (60") |
1610 (63") |
1720 (67") |
| Width of bed |
1345 (43") (4 guide way) |
| Distance between centers |
3000~12000 mm (120"~480") |
| Spindle bore |
Ø156 (6"), Ø230 (9"), Ø260 (10"), Ø310 (12"), Ø360 (14") |
| Spindle nose |
A2-11, A2-15, A2-15, A2-20, A2-20 |
| Spindle speeds (12 Steps) |
9-600, 6-400, 6-400, 5-300, 5-300 |
| Tailstock quill diameter |
Ø140 (5-1/2") |
| Taper of center |
MT#6 |
| Quill travel |
300 (12") |
| Cross feeds |
0.065-0.96 (48 Kinds) |
| Cross travel |
540 (21") |
| Compound rest travel |
300 (12") |
| Tool size |
40 x 40 (1-1/2" x 1-1/2") |
| Longitudinal feeds |
0.13-1.92 (48 Kinds) |
| Lead screw diameter |
Ø50 (2") |
| Lead screw pitch |
2TPI (inch) or 12mm (metric) |
| Threading range, metric |
2-30 mm/Pitch (48 Kinds) |
| Threading range, inch |
1-15 TPI (48 Kinds) |
| Module pitch threads |
1-15M (32 Kinds) |
| DP. pitch threads |
2-30P (48 Kinds) |
| Main spindle motor |
60 HP (Std.) or 75HP (Opt.) |
| Rapid motor |
1/2 HP |
| Coolant pump |
1/4 HP |
| Oil pump |
12W |
|
* The specifications are subject to change without notice
Example Machine Weight 52" bed
| Approx machine weight kgs (lbs) |
EV-70 |
EV-80 |
EV-100 |
| From 3 meter distance between center |
28000 (61600) |
29000 (63800) |
30500 (67100) |
| Weight per extra meter |
4500 (9900) |
|
